Two Handles Chrome Centerset Kitchen Faucet
Overview :Add to Wish List
Online Wholesale Electronics at discount prices!
>Wholesale Home & Garden
>Wholesale Kitchen Faucets
>Two Handles Chrome Centerset Kitchen Faucet
Overview :Add to Wish List
Save $37.33 Single Handle Chrome Centerset Kitchen Faucet $ 124.40
Save $35.32 Single Handle Chrome Centerset Kitchen Faucet $ 117.74
Save $47.87 Single Handle Chrome Centerset Pull out Kitchen Faucet $ 159.59
Save $35.23 Single Handle Chrome Centerset Kitchen Faucet $ 117.40
Save $27.75 Single Handle Nickel Brushed Centerset Kitchen Faucet $ 92.53
Save $31.38 Two Handles Chrome Centerset Kitchen Faucet $ 104.62
|Product Description|| Single Lever Chrome Centerset Kitchen Faucet with Hot and Cold Switch Function
|Suitable Place|| Kitchen
|Installation Type|| Centerset
| Valve Type
|| Ceramic Valve
|Dimension|| 31cm x 21cm x 15cm
|Shipping Weight (kg)|| 1.875
|What's in the box|| 1 x Faucet;
2 x Hose;
1 x Accessory Set;
1 x Installation Instruction
Step 3: Connect the Faucet Lift Rod
A-1: From the top of the sink, insert the lift-rod into the faucet.
A-2: From under the sink, make sure the pivot-rod is in the down position. Insert the lift-rod into the lift-rod strap. Tighten the screw.
B-1: From the top of the sink, make sure the lift-rod opens and closes the drain plug as desired.
B-2: Make any needed adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.
B-3: If you need to connect the lift-rod strap to the pivot rod, slide one end of the spring clip onto the pivot-rod.
B-4: Make sure that both the pivot -rod and the lift-rod are in the down position. Insert the pivot-rod in the closest hole in the lift-rod strap.
B-5: Slide the other end of the pivot-rod. Make sure the lift-rod opens and closes the drain plug as desired.
C-1: Make minor adjustments by loosening the lift-rod strap screw and repositioning the lift-rod.
C-2: Make major adjustments by removing the spring clip and moving the pivot-rod to a different hole in the lift-rod strap.
Step 4: Flush the Faucet
A-1: Anytime you work on plumbing, filings, chips, and other debris can fall into the plumbing pipes.
A-2: This debris can damage the sealing surfaces inside the faucet and cause leaks.
A-3: Remove aerator and black sealing gasket above it.
A-4: Before turning on the water supply, make sure the faucet handles are open (on position) in order to remove the debris without causing damage.
B: Open both water supply valves under the sink.
C-1: Allow the water to run for 15 seconds.
C-2: Close the faucet handles (turn off).
D: Make sure any debris is cleaned from the aerator screen.
E: Replace the aerator.